9- ENG
be removed and the top (pin end) just barely dressed off with a stone. It is not
necessary to do more than smooth off the top to get the necessary side play. Do
not grind. Reinsert the blade and pin in the stem and test for side play once more.
Repeat as necessary to get this small amount of side play. Carefully examine the
large threaded portion of the piston stem. A nylon lock can be seen imbedded in a
recessed hole in the stem. It is very important that this nylon lock can be replaced
when its locking efficiency has been reduced through several disassemblies of the
piston. It is necessary to use the sharp point of a knife, or some such instrument,
to remove this nylon lock. Insert a new one by setting it into the recessed hole in
the stem, and tapping it gently until firmly seated. Reverse these instructions to
reassemble.
E. Assemble plunger flush with end of piston stem.
Accessories
WARNING:
Since accessories, other than those offered by D
e
WALT, have not been
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
e
WALT recommended accessories should be used
with this product.
Recommended accessories for use with your tool are available at extra cost from
your local dealer or authorized service center. If you need assistance in locating any
accessory, please contact D
e
WALT Industrial Tool Co., 701 East Joppa Road, Towson,
MD 21286, call 1-800-4-D
e
WALT (1-800-433-9258) or visit our website: www.dewalt.
com.
Accessories Available
9R199607
Mallet, wooden
Register Online
Thank you for your purchase. Register your product now for:
•
WARRANTY SERVICE:
Registering your product will help you obtain more
efficient warranty service in case there is a problem with your product.
•
CONFIRMATION OF OWNERSHIP:
In case of an insurance loss, such as fire,
flood or theft, your registration of ownership will serve as your proof of purchase.
•
FOR YOUR SAFETY:
Registering your product will allow us to contact you in the
unlikely event a safety notification is required under the Federal Consumer Safety
Act.
Register online at www.dewalt.com/register.
Seven Year Limited Warranty
D
e
WALT will repair, without charge, any defects due to faulty materials or workmanship
for seven years from the date of purchase. This warranty does not cover part failure
due to normal wear or tool abuse. For further detail of warranty coverage and warranty
repair information, visit www.dewalt.com or call 1-800-4-D
e
WALT (1-800-433-9258).
This warranty does not apply to accessories or damage caused where repairs have
been made or attempted by others. This warranty gives you specific legal rights and
you may have other rights which vary in certain states or provinces.
