E
n
g
li
sh
7
Air Mover Position Operating
•
Use the angle position (Figure 3) for applications such as, drying
plaster on walls or drying wet furniture. To use this position, tilt
unit backwards so it rests on the support.
•
Use the up position for applications such as; drying paint on the
ceiling. To use this position, lay the unit on the back side with the
front grill pointing towards the ceiling (Figure 4).
The air mover may be set in one of three operating positions. Pick
the position best suited for your application.
• Use the down position (Figure 2) for applications such as; drying
wet floors, shampooed carpets, etc. To use this position simply
place unit on its base.
CAUTION:
After you plug the power cord into the wall receptacle, turn the
unit “ON” by pushing the switch position with 3 embossing straps
is the “ON” position.
• Before storing your air mover it should be cleaned.
• Wrap the power cord around the carry handle on the top of the
unit to keep it untangled (Figure 5).
THE AIR MOVER SHOULD BE STORED INDOORS.
STORAGE
O (OFF)
III (MAX)
II (MODERATE)
I (SMALL)
Figure 1
Figure 5
Figure 2
Figure 3
Figure 4
