28
EnGLIsh
EC‑Declaration of Conformity
Machinery and Radio Directive
Rotary Hammerdrill
DCH614
D
e
WALT
declares that these products described under
Technical
Data
are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
These products also comply with Directive 2014/53/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Vice‑President Engineering, PTE‑Europa
D
e
WALT
, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
22.12.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Rotary Hammerdrill
DCH614
D
e
WALT
declares that these products described under “technical
data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN60745‑1:2009+A11:2010,
EN60745‑2‑6:2010.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
DCH614
Voltage
V
DC
54
Type
2
Battery type
Li‑Ion
No‑load speed
min
‑1
190–380
No‑load beats per minute
bpm
1450–2900
Single impact energy (EPTA 05/2009)
J
10.5
Optimum drilling range into concrete
mm
16–32
Maximum drilling range in concrete
mm
45
Maximum core drilling range in concrete
mm
40–125
Tool Holder
SDS MAX®
Chisel positions
18
Collar diameter
mm
66
Weight (without battery pack)
kg
6.8
Noise values and vibration values (triax vector sum) according to EN60745‑2‑6:
L
PA
(emission sound pressure level)
dB(A)
93
L
WA
(sound power level)
dB(A)
104
K (uncertainty for the given sound level)
dB(A)
3
Drilling
Vibration emission value a
h, HD
=
m/s
2
8.8**
Uncertainty K =
m/s
2
1.5
Chiselling
Vibration emission value a
h,Cheq
=
m/s
2
8.1**
Uncertainty K =
m/s
2
1.5
** Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
HEAVY‑DUTY CORDLESS ROTARY HAMMERDRILL
DCH614
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
