26
EnGLIsH
a
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
EC‑Declaration of Conformity
Machinery Directive
Drill/Driver/Hammerdrill
DCD771, DCD776
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑1:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
e
WALT
, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
31.05.2017
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
DCD771
DCD776
Voltage
V
DC
18
18
Type
1/10/20
1/10/20
Battery Type
Li-Ion
Li-Ion
Power output
W
300
300
No-load speed
1st gear
min
-1
0–450
0–450
2nd gear
min
-1
0–1500
0–1500
Impact rate
1st gear
min
-1
–
0–7650
2nd gear
min
-1
–
0–25500
Max. torque (hard/soft)
Nm
42/24
42/24
Chuck capacity
mm
1.5–13
1.5–13
Maximum drilling capacity
Wood
mm
30
30
Metal
mm
13
13
Masonry
mm
–
13
Weight (without battery pack)
kg
1.28
1.34
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-1.
L
PA
(emission sound pressure level) dB(A)
72
85
L
WA
(sound power level)
dB(A)
80
96
K (uncertainty for the given sound
level)
dB(A)
3
3
Drilling into metal
Vibration emission value a
h,D
=
m/s
2
< 2.5
< 2.5
Uncertainty K =
m/s
2
1.5
1.5
Screwdriving
Vibration emission value a
h,D
=
m/s
2
< 2.5
< 2.5
Uncertainty K =
m/s
2
1.5
1.5
Drilling into concrete
Vibration emission value a
h,ID
=
m/s
2
–
14.0
Uncertainty K =
m/s
2
–
2.4
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD771, DCD776
Summary of Contents for XR Li-Ion DCD771
