background image

1

Definitions: Safety Guidelines 

The definitions below describe the level of severity for each signal 

word. Please read the manual and pay attention to these symbols.

DANGER:

 Indicates an imminently hazardous situation which, if not 

avoided, 

will

 result in 

death or serious injury

.

WARNING:

 Indicates a potentially hazardous situation which, if not 

avoided, 

could

 result in 

death or serious injury

.

CAUTION:

 Indicates a potentially hazardous situation which, if not 

avoided, 

may

 result in 

minor or moderate injury

.

NOTICE:

 

Indicates a practice 

not related to personal injury 

which, if 

not avoided, 

may

 

result in

 property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D

E

WALT TOOL, 

CALL US AT: 

1800 338 002 

(Aust) or 

0800 339 258

 (NZ). 

Technical Data

  

 

 

DCV582-XE 

Power source 

 

AC/DC

Mains Voltage 

V

AC

 230

Battery Voltage 

V

DC

 

14.4 or 18

Power W 

300

Tank volume 

7.5

Max. airflow 

l/s 

15.9

Protection Class 

 

IPX4

Hose nozzle diameter 

mm 

32

Weight kg 

4.8

L

PA

 (sound pressure) 

dB(A) 

76

K

PA

   (sound pressure uncertainty) 

dB(A) 

3

L

WA

 (sound power) 

dB(A) 

87

K

WA

   (sound power uncertainty) 

dB(A) 

3

The vibration emission level given in this information sheet has been measured in 

accordance with a standardised test given in EN 60745 and may be used to compare 

one tool with another. It may be used for a preliminary assessment of exposure.

 

WARNING:

 The declared vibration emission level represents the main applications 

of the tool. However if the tool is used for different applications, with different 

accessories or poorly maintained, the vibration emission may differ. This may 

significantly increase the exposure level over the total working period.

   An estimation of the level of exposure to vibration should also take into account 

the times when the tool is switched off or when it is running but not actually doing 

the job. This may significantly reduce the exposure level over the total working 

period.

   Identify additional safety measures to protect the operator from the effects of 

vibration such as: maintain the tool and the accessories, keep the hands warm, 

organisation of work patterns.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

 When using electric appliances, always follow basic safety precautions 

to reduce the risk of fire, electric shock and personal injury, including the following:

TO REDUCE RISK OF INJURY

  •  Before any use, be sure everyone using this vacuum reads and understands all 

safety instructions and other information contained in this manual.

  •  Save these instructions and review frequently prior to use and in instructing 

others.

  •  Instructions for compatible batteries and chargers are included for reference in 

this manual. Read all instruction manuals included with your battery or charger. 

Read all cautionary markings on the charger and battery. Consult the chart at the 

end of this manual for compatibility of chargers and battery packs.

Summary of Contents for XR-LI-ION DCV582-XE

















Reviews: