DeWalt XR-LI-ION DCV582-XE, Instruction Manual

7

  6.  Foreign materials of a conductive nature such as, but not limited to, grinding dust, 

metal chips, steel wool, aluminum foil, or any buildup of metallic particles should 

be kept away from charger cavities. Always unplug the charger from the power 

supply when there is no battery pack in the cavity. Unplug the charger before 

attempting to clean.

  7.  Do not freeze or immerse the charger in water or any other liquid.

WARNING: 

Shock hazard. Don’t allow any liquid to get inside the charger. Electric 

shock may result. 

WARNING:

 Burn hazard. Do not submerge the battery pack in any liquid or allow 

any liquid to enter the battery pack. Never attempt to open the battery pack for any 

reason. If the plastic housing of the battery pack breaks or cracks, return to a service 

center for recycling.

Storage Recommendations

  1.  The best storage place is one that is cool and dry, away from direct sunlight and 

excess heat or cold.

  2.  For long storage, it is recommended to store a fully charged battery pack in a 

cool dry place out of the charger for optimal results.

NOTE:

 Battery packs should not be stored completely depleted of charge. The battery 

pack will need to be recharged before use. 

SAVE ALL WARNINGS AND INSTRUCTIONS FOR 

FUTURE REFERENCE

COMPONENTS (Fig. 2, 6)

WARNING:

Never modify the power tool or any part of it. Damage or personal 

injury could result.

  A. Battery port 

F.  Side exhaust port

  B. Vacuum hose 

G.  Hose clip

  C. On/off button 

H.  Crevice tool

  D. Tank latch 

I.  Wide nozzle tool

  E. Filter (Fig. 6) 

J. Cord wrap

FIG. 2

B

D

F

C

J

G

I

H

A

INTENDED USE

This Vacuum is designed to operate only D

E

WALT 14.4V / 18V Li-ion slide pack 

battery or 230V AC input. Battery pack and charger are sold separately. The vacuum 

will automatically switch between AC and DC modes.

NOTE: 

The 230V AC power input is only designed to power the operation of the 

vacuum and will not charge an installed battery pack.
The vacuum is designed to perform as a wet/dry unit with no component changes 

required when changing from wet to dry, or dry to wet pick up. The appliance can be 

used both indoors and outdoors.
It is recommended that the tank be emptied of any dry contents prior to being used for 

wet pick up to facilitate tank cleaning.