EngliSh
5
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
Cordless Jigsaw
DCS334, DCS335
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-11:2016.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Director Engineering
D
e
WALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
23.05.2018
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
DCS334
DCS335
Voltage
V
DC
18
18
Type
1
1
Battery type
Li-Ion
Li-Ion
No-load speed
min
-1
0–3200
1000–3200
Stroke length
mm
26
26
Cutting depth in:
wood
mm
135
135
aluminum
mm
25
25
steel
mm
10
10
Bevel angle adjustment (l/r)
˚
0–45
0–45
Weight (without battery pack)
kg
2.1
2.0
Noise values and vibration values (triax vector sum) according to EN62841-2-11:
L
PA
(emission sound pressure level)
dB(A)
84
86
L
WA
(sound power level)
dB(A)
95
97
K (uncertainty for the given sound
level)
dB(A)
3
3
While cutting board
Handle
Vibration emission value a
h,B
=
m/s
2
7.0
5.3
Uncertainty K =
m/s
2
1.5
1.5
Head
Vibration emission value a
h,B
=
m/s
2
–
13.3
Uncertainty K =
m/s
2
–
3.6
While cutting sheet metal
Handle
Vibration emission value a
h,M
=
m/s
2
5.8
5.1
Uncertainty K =
m/s
2
1.5
1.5
Head
Vibration emission value a
h,M
=
m/s
2
–
8.1
Uncertainty K =
m/s
2
–
2.3
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration emission level
represents the main applications of the tool. However if
English (original instructions)
CORDLESS JIGSAW
DCS334, DCS335
Summary of Contents for XR Li-ION Series
