background image

1

 

GB/IE/CY

Operating and Safety Instructions 

Introduction

Please read these operating instructions carefully to the end. They belong to this product 
and contain important information on setting up and handling this device. It is important 
that you always follow the safety instructions. If you should have any questions or are 
not certain how to handle this device, please visit www.dexaplan.com on the Internet 
or contact your service centre. Please keep these instructions in a safe place and pass 
them on to anyone who uses this device.

Intended Use 

The light controller is designed to switch lights on and off automatically in order to 
make others believe you are at home, for example. It should only be used in private 
households. If it is to be used outdoors, a weatherproof housing should be used for 
the lamps. Any use of the device other than that described below, or any modification 
to the device, is not permitted and may result in hazards such as injuries and technical 
malfunctions (e.g. short-circuit, fire, electric shock) or damage.

Technical Data

Fitting type:  

B22 double-contact bayonet  

Approved illuminants:  

 Bulb, min. 40 W to max. 100 W (in the case of closed 
lampshades max. 60 W) Energy-saving lamp, min. 7 W to 
max. 23 W 

Safety Instructions

If damage occurs as a result of non-compliance with these operating instructions, all 
guarantee claims shall become invalid! No liability will be accepted for consequential 
damage! The manufacturer will not accept responsibility for damage or injury to pro-
perty or individuals resulting from improper handling or non-compliance with the safety 
instructions!

   Danger!

 Non-compliance with these instructions places the user’s life or health 

in danger.

 Caution!

 Non-compliance with these instructions places other items in danger.

   Danger!

J

 

 Before installing the device, please turn the power supply off. Ensure that the 
lamp socket is not live during installation and that nobody can turn the power 
on again while the device is being installed.

J

 

 It is important to ensure that there is sufficient safety clearance between the illu-
minant and other items. It is possible that when the device is fitted the clearance 
to combustible materials such as lampshades etc. is reduced.

J

 

 Do not open the device. The voltage inside the device is high! Otherwise there 
is a possibility of electric shock and a danger of death! 

J

 

 Do not insert any objects into the socket or device, as otherwise you might touch 
live parts! Danger of electric shock, fire or death!

J

 

 It is essential to ensure that the device does not come into contact with water or 
moisture. Otherwise there is a danger of electric shock, fire or death!

J

 

 The device should only be cleaned with a dry or slightly damp cloth, keeping 
the bayonet cap and socket dry. Otherwise there is a danger of electric shock or 
death.

J

 

 The device should not be left in the hands of children. It is not a toy. Otherwise 
there is a danger of death!

Random Light Controller SL 614 B

Dexaplan

LL

 36

AV4583_Zufallsschalter_Content_LB6.indd   1

07.05.2008   14:29:37 Uhr

Reviews: