NDS3107C Multiplexer User Manual
Chapter 3 Operation
NDS3107C multiplexer’s front panel is user operation interface. The detailed operations go as
follows:
Keyboard Function Description:
MENU
: Canceling presently entered value, resuming previous setting; Return to previous menu.
ENTER
: Activating the parameters which need modifications, or confirming the change after
modification.
LEFT/RIGHT
: To choose and set the parameters.
UP/DOWN
: Modifying activated parameter or paging up/down when parameter is inactivated.
LOCK
: Locking the screen / canceling the lock state. After pressing lock key, the system will
question the users to save present setting or not. If not, the LCD will display the current
configuration state.
At the page of 5.2 “Load default CFG”, user can firstly press “ENTER” key, consequently
system resumes factory parameter setting.
3.1 LCD Menu
An overview of the LCD menus:
Initializing
Current General
Working Status
1 Status
1.1 Uptime
2 TS Config
2.1 Out 1
PMT Interval
SDT Interval
SDT Insert
Packet Mode
Out Bit Rate
Original Net ID
Transport Stream
Same contents as Out 1
1.2 Alarm
2.1 Out 2
PAT Interval
8
