Dexter Power 3276000254652, Legal And Safety Instructions

1. SAFETY INSTRUCTIONS

18

EN

4. POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power tool for your application. 

The correct 

     power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. 

Any power tool that 

     cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool 
     before making any adjustments, changing accessories, or storing power tools.

 Such 

     preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar 
     with the power tool or these instructions to operate the power tool. 

Power tools are 

     dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of 
     parts and any other condition that may affect the power tool’s operation.

 If damaged, have 

     the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Properly maintained cutting tools with sharp cutting edges 

     are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, 
     taking into account the working conditions and the work to be performed. 

Use of the 

     power tool for operations different from those intended could result in a hazardous situation.

5. SERVICE

a) Have your power tool serviced by qualified repair person using only identical 
      replacement parts.

 This will ensure that the safety of the power tool is maintained.

Safety Warnings Common for Polishing Operations:

a) This power tool is intended to function as a polisher. Read all safety warnings, 
     instructions, illustrations and specifications provided with this power tool. 

Failure to 

     follow all instructions listed below may result in electric shock, fire and/or serious injury.

b) Operations such as grinding, sanding, wire brushing or cutting-off are not recommended 
     to be performed with this power tool.

 Operations for which the power tool was not designed 

     may create a hazard and cause personal injury.