33
2
Hardware Installation
Power-on Select
X
1-2 On:
Power-on via
power button
(default)
3
1
2
3
1
2
JP6
2-3 On:
Power-on via
AC power
JP6 is used to select the method of powering on the system. If you
want the system to power-on once AC power comes in, set JP6
pins 2 and 3 to On. If you want to use the power button, set pins
1 and 2 to On.
Important:
If you want the system to automatically power-on when power
returns after an AC power failure, you must:
1. Set JP6 pins 2 and 3 to On.
2. The PWRON After PWR-Fail field must be set to "On".
(Integrated Peripherals submenu, Super I/O Device section
of the BIOS).
