Pentium
TM
OverDrive Ready System Board
AMI BIOS Setup Utilities
If you want to change your CMOS setup, press <Del>
when the message, "Hit <Del> if you want to run setup",
appears on the screen. Again, if you enabled the pass-
word option, you will be prompted to the message
below:
Enter CURRENT Password:
The default password is AMI. For information on how
to change the password, refer to the "Change Password"
section on page 3-8. After entering the correct pass-
word, the screen below appears. If the password option
is disabled, you will directly access this screen.
Use the arrow keys to highlight the option you want and
hit the <ESC> key.
Note:
Before you access the setup utilities, a warning message
will appear.
3-2
u
Initial Setup Program
