77
3
Award BIOS Setup Utility
If you selected an option other than the default setting and is un-
able to boot up the system, there are 2 methods of booting up the
system and going back to its default setting.
Method 1:
Clear the CMOS data by setting JP3 to 2-3 On. All fields in the
BIOS Setup will automatically be set to their default settings.
Method 2:
Press the <Insert> key and power button simultaneously, then re-
lease the power button first. Keep-on pressing the <Insert> key
until the power-on screen appears. This will allow the system to
boot according to the FSB of the processor. Now press the <Del>
key to enter the main menu of the BIOS. Select “Frequency/Voltage
Control” and set the “Clock By Slight Adjust” field to its default
setting or an appropriate bus clock.
Note:
Use a PS/2 or AT (requires a DIN to mini DIN adapter) key-
board for method 2.
