background image

23

Time

The time format is <hour>, <minute>, <second>. The time is based on
the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.

Hour

Minute

Second

Displays hours from 00 to 23

Displays minutes from 00 to 59

Displays seconds from 00 to 59

Primary Master, Primary Slave, Secondary Master and Secondary
Slave

These categories allow you to enter the appropriate specifications for
the type of hard disk drive(s) installed in your system. There are 45
predefined types and 4 user definable types for hard drives. Type 1 to
Type 45 are predefined. Type User is user-definable.

Press <PgUp> or <PgDn> to select a numbered hard disk type or type
the number and press <Enter>. The hard disk will not work properly if
you enter improper information for this category. You can use Type
“User” to define your own drive type manually.

If you select Type “User”, you will need to know the information listed
below. Enter the information and press <Enter>. This information should
be included in the documentation from your hard disk vendor or the
system manufacturer.

If the controller of the HDD interface is ESDI, you must select “Type 1”.

If the controller of the HDD interface is SCSI, you must select “None”.

If you select Type ”Auto”, the BIOS will auto-detect the HDD & CD-ROM
drive at the POST stage and show the ID for the HDD & CD-ROM drive.

Summary of Contents for G586IPE

















































Reviews: