- 10 -
2-6.
Temperature Alarm Event and Measurement Area
Please go to the web interface
【
Setup Menu
】
>
【
Event Control
】
>
【
Event Overview
】
>
【
Environment Events
】
Set the minimum alarm temperature (ex
：
alarm when temperature reach 37.5
degree)
(1)
Add a new Environment Events, we named as ‘Tar’.
(2)
Event Dead Time
Delay alarm for few seconds when event occur.
(3)
Event Sensor Type
Choose Thermal Radiometry
(4)
Edit Measurement Area
To set the measurement area, please click the blank setting box first.
Open the live view page (don’t close the setting page).
Use shift + left-click on the thermal image, you will see the first set point.
Then release shift, left-click second point in the image.
Two point will be connected into a quad automatically.
After drawing the quad, press
，
system will update the coordinate.
