- 7 -
2-3.
Temperature Compensation
To do the temperature calibration, please go to the web interface
【
Setup Menu
】
>
【
Image
Control
】
>
【
Thermal Sensor Settings
】
>
【
Temperature Compensation
】
Device has been set the temperature compensation before leaving the factory. To ensure the
accuracy, please set the temperature compensation before you start to use.
To calibrate the temperature, you need to set a subject with constant temperature. If the
temperature measured by is different from the subject, please adjust the atmospheric
transmission and ambient temperature.
(* The recommended value of atmospheric transmission is below 98. When the atmospheric
transmission be set as 100, it means ther is no air obstruction between device and subject, it
makes the ambient temperature parameter invalid.)
2-4.
Connect with EZ Pro
To connect with EZ Pro, please go to the web interface
【
Admin Menu
】
>
【
Transfer Profiles
】
>
【
IP Notify Profiles
】
>
【
Add New Profile
】
Please set the new profile as below:
(1)
IP Notify Type
Choose
(2)
Destination Address
Enter EZ Pro serverIP(and port)
(3)
Data Protocol
Please choose the item as below and the fill admin:admin13579 in the third field.
(4)
Data Type
Choose Plain text
