105
3
BIOS Setup
PC Health Status
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Menu Level
X
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
85
o
C/185
o
F
> 50
o
C
< 25
o
C
> 35
o
C
< 25
o
C
> 55
o
C
< 25
o
C
3.16V
4.89V
11.71V
4.89V
3.28V
41
o
C
44
o
C
45
o
C
0 RPM
0 RPM
3668 RPM
Shutdown Temperature
CPUFan Fully ON If CPUTemp
CPUFan Turn OFF If CPUTemp
CHSFan Fully ON If CHSTemp
CHSFan Turn OFF If CHSTemp
NB Fan Fully ON If NB Temp
NB Fan Turn OFF If NB Temp
ATX +3.3V Voltage
ATX +5.0V Voltage
ATX +12V Voltage
+5V Dual Voltage
Battery Voltage
CPU CORE Temperature
PWM AREA Temperature
CHIPSET Temperature
CPU FAN Fan Speed
CHS Fan Speed
CHIPSET Fan Speed
Shutdown Temperature
You can prevent the system from overheating by selecting a tem-
perature in this field. If the system detected that its temperature
exceeded the one set in this field, it will automatically shutdown.
CPUFan Fully On If CPUTemp
This field is used to select the CPU temperature that will allow the
CPU fan to rotate at full speed.
CPUFan Turn Off If CPUTemp
This field is used to select the CPU temperature that will allow the
CPU fan to rotate at a start speed which is the slowest speed.
Note:
1. If the CPU temperature runs between the highest (set in
the “CPUFan Fully On If CPUTemp” field) and lowest (set in
the “CPUFan Turn Off If CPUTemp” field) temperature, the
system will automatically adjust the CPU fan’s speed ac-
cording to the temperature.
2. If you want to reduce the CPU fan’s noise or prevent CPU
overheat, select a lower temperature in the “CPUFan Fully
On If CPUTemp” field to allow the CPU fan to rotate full
speed at the selected lower temperature.
Summary of Contents for LanParty UT CFX3200-DR
