112
3
BIOS Setup
32 Byte Granularity
This field is used to determine whether the burst counter should be
enabled to optimize data bus bandwidth for 32-byte access.
Burst Length
This field is used to select the DRAM’s burst length. The DRAM will
predict the address of the next memory location to be accessed
after the first address is accessed. To use the burst feature, select the
burst length which is the actual length of burst plus the starting
address and allows internal address counter to properly generate
the next memory location. The larger the size, the faster the DRAM
performance.
Summary of Contents for LanParty UT CFX3200-DR
