2
Hardware Installation
27
One card-edge bracket mounted with a serial port cable is provided
with the system board. If you want to use the secondar y serial por t,
connect the serial por t cable to connector J6. Make sure the colored
stripe on the ribbon cable is aligned with pin 1 of connector J6.
Mount the card-edge bracket to the system chassis.
2.6.1.2 NS30-SC and NS30-SL
COM 1
Serial Port
COM 2
Serial Por t
The NS30-SC and NS30-SL system boards are equipped with
onboard serial ports (COM 1: J4 and COM 2: CN1) - both in Teal/
Turquoise color located at the ATX double deck por ts of the each
board.
J4
CN1
COM 1
COM 2
(Teal/Turquoise)