75
3
BIOS Setup
Resume on PCI Event
Enabled
This field should be set to Enabled only if your PCI
card such as LAN card or modem card uses the PCI
PME (Power Management Event) signal to remotely
wake up the system.
Access to the LAN card or PCI
card will cause the system to wake up.
Refer to the
card’s documentation for more information.
Disabled
The system will not wake up despite access to the
PCI card.
Resume On Ring
When enabled, the system will power-on to respond to calls com-
ing from an external modem.
Resume on Alarm
Enabled
When Enabled, you can set the date and time
you would like the Soft Power Down (Soft-Off)
PC to power-on in the “Date (of Month)” and
“Resume Time (hh:mm:ss)” fields. However, if the
system is being accessed by incoming calls or the
network prior to the date and time set in these
fields, the system will give priority to the incom-
ing calls or network.
Disabled
Disables the automatic power-on function. (de-
fault)
Date (of Month)
0
The system will power-on ever yday according to
the time set in the “Resume Time (hh:mm:ss)” field.
1-31
Select a date you would like the system to power-
on. The system will power-on on the set date, and
time set in the “Resume Time (hh:mm:ss)” field.
Resume Time (hh:mm:ss)
This is used to set the time you would like the system to power-
on. If you want the system to power-on everyday as set in the
“Date (of Month)” field, the time set in this field must be later
than the time of the RTC set in the Standard CMOS Features
submenu.
