www.d
fi
.com
Chapter 2 Hardware Installation
10
Chapter 2
Clear CMOS Data
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP12 pins 2 and 3 to On. Wait for a few seconds and set JP12 back to its default set-
ting, pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
JP12
1-2 On: Normal
(default)
1
3 2
2-3 On:
Clear CMOS Data
1
3 2
Super IO Select
JP6
1
3
2
2-3 On: Disable
(default)
1
3
2
1-2 On: Enable
JP16 is used to select enable or disable the super IO select.
JP16