Vehicle Devicesxs and Mechanics Operation
23
directions: Cold air is sent off from the
centre intake, and the warm air is sent
off from the bottom intake.
③
Warm Air
Warm air is sent off from the
exhaust port on the floor.
④
Defrost & Warm Air
Warm air is sent off from the
exhaust port on the floor, some is sent
off from the defrost exthaust port of
windscreen and side defrost exhaust
port.
⑤
Defrost
⑥
Cycle Control Button of
Inside & Outside
Control the circulation of the air of
inside & outside.
⑦
Tempreture control button
Control the tempreture of cold &
warm air (blue is cold air, and red is
warm air)
⑧
Draft Control Button
Control the rotate speed of fan, that is ,
adjust the draft.
⑨
Optional Button for
Ventilate Position
Note:
The time for blowing should not
be too long while the air is in inner
circulation so as to avoid the air in the
vehicle too dirty and the windpane
will become humidity and with low
thickness oxygen.
18. Assembled Meter
This is just for reference
①
Speedometer
②
Odometer
③
Left & Right turning indicator
light
④
Water Thermometer
⑤
Fuel Gauge
⑥
Short-range Odometer
⑦
Return Button for Short-Range
Odometer
Summary of Contents for K 2019 Series
