Flight manual DG-800S
7.4
Flight controls
Rudder control:
See diagram 2 M.M.
cable system with adjustable pedals.
Elevator control:
See diagram 1 M.M.
Parallelogram control column stick. The parallelogram system reduces the
possibility of pilot induced oscillations.
All pushrods slide in maintenance free nylon ball guides.
Automatic control hook up system.
Trim:
Spring trimmer with release lever at the control stick and position
indicator at the left cockpit wall.
To trim, you have to operate the release lever and bring the control stick
and the wing flap handle to the appropriate position for the desired trim
speed.
If this is not enough, you can in addition push forward the trim indicator
(release lever operated).
It is possible to fly the DG-800S with the trim released. A rubber cord
connects the wingflap control with the trim system (see maintenance
manual sect. 1.2.5) and applies forward trim with negative flap settings.
Aileron and wingflap control:
See diagram 3 and 4 M.M.
The wings feature single piece flaperons, which are driven at two places.
The mixing of aileron and flap deflections takes place in the fuselage.
Pushrods slide in maintenance free nylon ball guides.
Automatic control hook up system.
7.5
Airbrakes
See diagram 3 and 4 M.M.
Double storey Schempp-Hirth type airbrakes on the upper wing surface.
When operating the airbrakes the wingflaps will be moved from negative
to neutral position.
The wheel brake is operated by the airbrake system.
Pushrods in the wings slide in maintenance free nylon ball guides.
Automatic control hook up system.
Issued: April 1997 7.6