Page | 11
3.
Hardware Configuration
3.1 First Time Hardware Connection to the PC
Note: For Windows Vista or 7 32-bit ONLY, see below. For Windows Vista or 7, 64-bit, a screen
will display in the lower right corner of the screen indicating automatic driver installation.
Step 1
: Connect the VSI-2534 to a power source (Power adapter or powered from the
OBD II cable). Note: do not power unit from multiple sources. Power LED must be a
solid Green. Connect USB Cable to PC. In some versions of Windows the final step in
driver installation is automatic. In others, the Windows Found New Hardware Wizard will
run to finalize driver installation. This can take a few moments to come up.
Step2:
Select
“Install the software automatically” or “Yes now – and every time I
connect a new devi
ce” and click “Next”.
Step3:
Click “Finish”.