background image

Page | 20  

 

6. Warranty Information and Limitation Statements 

6.1. Warranty Information 

 
DG Technologies VSI-2534 is warranted against defects in materials and workmanship for two (2) years following date of 
shipment. Cables (both USB and vehicle) are warranted for 90 days. 
 
DG Technologies, Inc. will, at its option, repair or replace, at no cost to the customer, products which prove to be defective 
during  the  warranty  period,  provided  the  defect  or  failure  is  not  due  to  misuse,  abuse,  or  alteration  of  the  product.  The 
customer is  responsible for shipment  of  the  defective  product to  DG.  This  warranty  does  not cover damage  to  any  item 
that DG Technologies determines has been damaged by the customer's abuse, misuse, negligence, improper assembly, 
modification, or operation of the product. 
 
A Return Merchandise Authorization (RMA) number must be issued to the customer by our Technical Support Department 
at  (248)  888-2000  and  must  be  included  with  the  product  being  returned  (for  more  details,  see  section 

Return 

Merchandise Authorization (RMA)

). A VSI is warranted for 90 days after a warranty repair, or to end of the original factory 

warranty period, whichever is longer. 

6.2. Limitation Statements 

6.2.1. General Limitation and Risk Assignment 

To  the  maximum  extent  permitted  by  applicable  law,  DG  Technologies 
and its suppliers provide support services on an “as-is” basis and disclaim 
all  other  warranties and  conditions not  specifically  stated herein,  whether 
express,  implied  or  statutory,  including,  but  not  limited  to,  any  warranties 
of  merchantability  or  fitness  for  a  particular  purpose,  lack  of  viruses, 
accuracy or completeness of responses, results, lack of negligence or lack 
of  workmanlike  effort,  and  correspondence  to  description.  The  user 
assumes  the  entire  risk  arising  out  of  the  use  or  performance  of  the 
device, its operating system components, and any support services. 

6.2.2. Exclusion of Incidental, Consequential and Certain Other 
Damages 

To the maximum extent permitted by applicable law, in no event shall  DG 
Technologies  or  its  suppliers  be  liable  for  any  special,  incidental,  indirect 
or  consequential  damages  whatsoever,  including  but  not  limited  to: 
damages  for  loss  of  profit,  loss  of  confidential  or  other  information; 
business  interruption;  personal  injury;  loss  of  privacy,  failure  to meet  any 
duty  (including  good  faith  or  of  reasonable  care);  negligence;  and  any 
other pecuniary or other loss related to the use of or the inability to use the 
device,  components  or  support  services  or  the  provision  of  or  failure  to 
provide  support  services  or  otherwise  in  connection  with  any  provision, 
even  if  DG  Technologies  or  any  supplier  has  been  advised  of  the 
possibility of such damages. 
 
 
 

Summary of Contents for VSI-2534
























Reviews: