Page | 5
1.
Introduction
How it works:
A PC is connected to a vehicle through the VSI-
2534 “Pass-Thru device” to the
OBD-II J1962 connector and on to the ECUs. The VSI-2534 provides the translation interface
between the PC and the vehicle or module.
The user software application on the PC sends and receives data to the vehicle using the DG
Technologies VSI-2534.
Provides support for:
the most current version of the J2534 API (Version 04.04) and D-PDU
API.
Supports the following protocols:
CAN (ISO 11898, J2284)
Single-Wire CAN
ISO15765
ISO 9141
KWP2000
J1850 PWM (Ford SCP)
J1850 VPWM (both GM Class 2 and Chrysler)
SCI
GM-UART
Features:
•
USB 2.0 connection to a PC for fast downloads. (Operates at full network speed with fast
and efficient data transfers.)
•
Connects to a vehicle with an OBDII cable or a custom cable.
•
Runs the SAE J1699 Vehicle Validation software.
•
On or off-board J2534 module programming.
•
Programming voltages
– 5 to 20 V in 100 mV steps.
•
Useful for diagnostics or module development.