MA_ENG_REV_User Manual Revelation_REV 1508
7
actual board. If you see LED patterns that you cannot explain, please match the real board with the
internal board as shown in the display.
Taking back the pieces
Revelation II allows you to take back moves, but only after the computer has made its move. First
await the computers move. Then place the piece that the computer wants to move on the
destination square. Then put it back on its source square. The display will then indicate TAKEBACK
Active.
This picture below shows that Nc3 can be taken back to b1:
The LEDs in the board will now indicate your last move. You can then put your piece on the original
square. Next the LEDs will indicate the previous move made by the computer that you can then take
back and so on.
The last piece you take back should be your own. Then press the
button. The display will show
“TAKEBACK Not Active” and you can play your next move.
If you decide not to take back your own move as the last action, then you should press
to
indicate that the computer should make the next move. You can also activate TAKE BACK in the
menu structure, see “Basic option: ‘TAKEBACK’” on page 11 for more detail.
Auto new game
When you place all the pieces in the initial position, Revelation II will assume you want to start a new
game and you can play white. When you place the black pieces and white pieces in reverse position,
Revelation II will assume you want to start a new game in reverse position. You can then play with
black.
