Control box
Control box - LED lights up yellow during operation, is off when the table is not
in use. When the control box is connected to the mains, the LED lights up green.
When driving / connected to the mains, the LED lights up yellow.
The door on the
control box can be opened with a thumb grip..
1.
Socket for the width adjustment actuator.
2.
Hand control socket.
3.
Battery outlet.
4.
Socket for actuator up / down.
5.
Socket for plug.
•
LED lights YELLOW during charging (at the same time as the charging indi-
cator on the hand control flashes yellow).
•
The LED goes out when the battery is fully charged (the same applies to the
charge indicator on the hand control).
Trouble shooting
If the lifting function cannot be activated, check the following:
•
That all cables are properly and securely connected,
Pull out the contact and plug it in again firmly.
•
That battery charging is not in progress.
•
That the battery is charged.
If the device is not working properly, contact your distributor.
If the device makes unusual noises:
•
Try to determine the source of the sound. Take the device out of operation and contact your distributor.
Battery Charging
Battery charging must take place when the device is not in use.
Charging starts automatically when power plug is connected to 230V wall socket.
2
3
4
5
1
11
I F U
Summary of Contents for SystemRoMedic Bure Rise & Go DB
Page 2: ...2 I F U...
Page 178: ...178 I F U Parts...
