2. Contraindications, Precautions and Warnings
Bure Rise & Go DB
Instructions for use - English
The Bure Rise & Go Double is an electrically operated Walker that is enhanced with a power rise function. The product
consists of a Walker and its associated harness and straps.
1. Intended use
Walkers are indoor, movable and portable assistive aids, which together with approved accessories are intended to
be used for transfer from sitting to standing positions, and walking training. Walkers are to be used by persons with
reduced muscular strength, who shall be able to stand and perform simple leg movements. Walkers are to be used
for leaning on when walking and standing during early mobilization training. Walkers and accessories are intended for
indoor use only in Home Healthcare environment and Professional Healthcare facility environment.
Contradictions
•
The device may not be used by patients above the maximum weight indicated on the label of the device
Precautions
•
Check that the device is used on a dry and flat surface.
•
Check the device is correctly mounted/assembled before its first use.
•
Check the device after every folding/disassembly after any transport.
•
Check height adjustment and leg spreading motions and inspect the actuators full ranges.
•
Activate the brakes whenever the device is not in use.
•
Check the function of the brakes before use.
•
Inspect the device regularly to detect any signs of damage. If there are any visible signs of damage, contact
Direct Healthcare Group Customer Service.
•
Check that the hand control does not show signs of wear before every use.
•
Check that the hand control markings are in accordance with the lifting functions.
•
Check the battery status of an electrically operated model before using the device.
•
Warranty applies only if repairs or alterations are made by personnel who are authorized by Direct Healthcare
Group.
•
Ensure that there are no obstacles or people in the way of the device, when moving.
•
Handle batteries with care. Do not drop.
•
Use only batteries and cables that are intended for the device as instructed by the manufacturer.
•
Verify that potential accessories that might be used are properly attached to the device before use.
•
Low speed is recommended when moving with the device.
•
Take care not to drive the device over thresholds with high speed or force. Approach the threshold with lower
speed and communicate the coming threshold to the patient.
•
In case of an electrical model of the device, check that the hand control does not show signs of wear before
every use
•
Keep the instructions for use together with the product so that it can be used as a reference if necessary.
•
Beware of moving parts during usage.
•
Peform a risk assessment on the patient before using the Walker to ensure they can stand and peform simple
movements.
4
I F U
Summary of Contents for SystemRoMedic Bure Rise & Go DB
Page 2: ...2 I F U...
Page 178: ...178 I F U Parts...
