A 2-channel radio system is required for this model. This includes 2.4GHz transmitter and receiver. Please
refer to 2.4GHz Transmitter Manual.
This monster truck comes with a 9-cell 10.8V 3000mAh SC type NiMh battery. The battery is with T-
connector, so does the battery charger. Besides, the ESC also has a T-connector to match it on the
battery.
Below you may find the features and specifications of the high voltage ESC for your Shogun.
High Voltage ESC (Part# H126)
Features
1. Auto search throttle neutral point.
2. HF drive system
3. Over-heat protection (90C°)
4. Lipo battery low-voltage protection (2S Lipo-6.6V cutoff, 3S Lipo-9.9V shut down)
5. Low internal resistance & big capacity PCB board, providing great resistance to high current.
6. Forward, brake and reverse functions, good for both vehicles and boats.
Specifications
Operation
To obtain forward, brake and reverse functions and to switch battery types, kindly refer to the following
Skipping Needles Matrix for detail. This matrix provides clear information for operation.
Model Specifications
Radio System
Overall length:
19.5" (497mm)(including rear wing)
Width:
15.3" (389mm)
Height:
7.1" (181mm) (including rear wing, body not included)
Wheelbase:
12.9" (330mm)
Ground clearance:
1.96" (49.8mm)
Front track/rear track:
12.1" (306mm)/12.3" (313mm)
Tire diameter/width:
Ф
6.2”/3.7” (
Ф
158/95mm)
Wheel diameter/width:
Ф
3.5”/2.6” (
Ф
88/66mm)
Gear ratio:
12.33:1
Forward current: 380A
Reverse current: 190A
Brake current: 250A
Voltage range: 4.8V-12.6V
PWM frequency: 1.5KHz
BEC voltage: 5V/2A
Battery and ESC information
Summary of Contents for Shogun 8385
