EN
A27
DHOLLANDIA
N° Description
...
...
6
Outer side skirts, preventing finger traps for accidental
bystanders on the sides of the platform, between the
different elements of the lift arms.
7
Hydraulic cylinder + safety valve, keeping the
automatic roll-stop [See 4.2] locked in vertical position
until the platform reaches the ground.
8
Electric emergency stop, Allows to switch-off the
electric power to the control unit, and to cause an
immediate stop of all electrically actuated lift
movements. Is either incorporated in the control unit
[ref. OWE005.02] or supplied as a separate box [ref.
OWE005.01]
9
Lever + switch system setting the correct height for
sliding in / out.
For 2-button wander leads: when starting the use:
when sliding out, the platform automatically starts to go
up when the work position is reached.
When ending the use: when lowering the platform from
any height above the cassette, the platform
automatically slides in into storage position when the
correct height is reached. (Condition: side gates and
bridge plate folded in storage position).
10
Automatic cassette lock. In travel position, the lift frame
and its platform are blocked automatically inside the
cassette by a locking mechanism at the inboard side of
the lift frame, and by a brake on the electric motor used
to slide in / out.
11
Emergency release handle. Enables the operator to
release the automatic cassette lock in case of electric
failure of this system.
8
12
9
10
12
13
Fig. 4.2
Fig. 4.3
8
8
Fig. 4.4
Fig. 4.5
Summary of Contents for CH100 Series
Page 10: ...DHOLLANDIA A10...
