23
EN
DHOLLANDIA
5.1
5.2
5.3
M
5) MOUNTING THE PLATFORM TO THE HTL FRAME
•
As the platform is still laying on the ground, remove the
grease nipples and the locking bolts for the articulation
pins from the platform (= 2 on left side, 3 on right side).
[See Fig. 5.1]
•
Then remove the 2 articulation pins, which are pre-
mounted in the platform, away from the platform. [See Fig
5.2]. When doing so, note the correction position and di-
rection of every articulation pin.
•
Thoroughly grease the articulation bearings on
the platform, and on the lift arms of the HTL on
the vehicle before mounting the platform. [See
Fig. 5.3]
1
2
2
1
3
1
2
1
3
3
2
