28
DHOLLANDIA
12
END STOPS AND ADJUSTMENT OF THE TOOTHED BARS
•
The inboard platform edge of most slider lifts is equipped with buffers to press the platform against the rear sill of the body.
[Figure 12.1]
•
The correct alignment of the platform with the rear sill is ensured by:
1.
The end stops for the slide plates in the slide tubes
2.
End stops for the lift arms against the chassis
•
The end stops for the slide plates consists of a lock plate [1] to be inserted inside the slide tube, a toothed clamp [2]to go on the outside
below the slide tube, and a bolt + nut M16 [3] to compress both together. [Figure 12.2
–
12.3]
Figure 12.1
Figure 12.2
Figure 12.3
Summary of Contents for DH-SM
