36
Warning:
ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING OR
SERVICING THE UNIT.
Clean:
General cleaning or the unit will greatly prolong the treadmill.
Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the walking belt
and also the side rails. This reduces the build up of foreign material underneath the walking belt by wearing the clean
running shoes.
Warning:
Always unplug the treadmill from the electrical outlet before removing the motor cover.
At least once
a year remove the motor cover and vacuum under the motor cover.
RUNNING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may play a major
role in the function and life of your treadmill, thus requiring periodic lubrication. We recommend a periodic inspection of the
deck. You need contact with our service center if you find the damage of the deck.
We recommend lubrication of the deck according to the following timetable:
Light user (less than 3 hours/ week) annually
Medium user (3-5 hours/ week) every six months
Heavy user (more than 5 hours/ week) every three months
We recommend that you buy the lubrication from our distributor or directly to our company.
Attention:
Any repair need the professional technician.
1. We suggest that you should cut off the power for 10Mints after keep running 2HS ,so that it’s good for
maintain the treadmill.
2. For avoiding the slipping during running , the belt not too loose; for avoiding the more abrasion
between the roller and belt and maintain the machine’s good running ,the belt not too tight. You can
adjust the distance between plates and belt , the belt be away from the plates about 50-75mm on both
sides ,if the best not too tight and loose.
RUNNING BELT ADJUSTMENT
Summary of Contents for DHS 5450
Page 18: ...18 PARTI COMPONENTE...
Page 38: ...38 Exploded Parts Diagram...
