37
CENTER THE RUNNING BELT
●Place treadmill on a level surface. Run
Treadmill at approximately 6-8KM/H,
checking the running condition.
If the belt has drifted to the right, pull out of
the save clock and switch, turn the right
adjusting bolt 1/4 turn clockwise, then start
running until centering the belt. PIC A
If the belt has drifted to the left ,pull out of
the safety clock and switch, turn the left
adjusting bolt 1/4 turn clockwise ,then start
running until centering the belt .PIC B
Timely adjust the tightness of the belt ,for
the looseness after a period of time running.
Pull out of the safety clock and switch , turn
the left and right adjusting bolt 1/4 turn
clockwise ,then re-start running, confirm the
belt-tightness until the belt be right tightness.
PIC C
Summary of Contents for DHS 5450
Page 18: ...18 PARTI COMPONENTE...
Page 38: ...38 Exploded Parts Diagram...
