DL107 Operating Manual
Di-LOG
...measurably better
1. Operating Instructions
Turning the detector on
With a short press of the power button, the
buzzer will beep twice and the red indicator
display on the panel will illuminate, indicating
that the detector is on and ready for use.
The default AC voltage detection range is
set to high (90 - 1000V).
Turning the flashlight on/off
A short press of the flashlight button will
turn the flashlight on/off. The flashlight
will automatically turn off when the detector
is not used for 5 minutes.
V. Display and Controls
1. Non-contact voltage sensor
2. LED Flashlight
3. LED for Voltage Indication
4. High/Low mode status indicator light
5. Power button
6. Flashlight On/Off button
7. Pocket clip
8. Battery case cover
Note: Please unplug other electrical
devices connected to the socket
before detection.
7
Summary of Contents for DL10 Series DL107
Page 12: ......