BL
BL
BL
BL----300
300
300
300
Floor grinder
Page 3 / 9
1.1.4.
Using the machine
When using the machine the operator must comply with the following instructions:
1. Check the machine before use.
2. Use prescribed personal safety aids while working. (Helmet, earmuffs, safety shoes, goggles,
respirator, gloves…).
3. While working monitor the machine for unusual sounds or smoke which may indicate defect. When
defect is indicated immediately stop the machine and call for expert repair.
4. It is necessary to provide an adequate supply of fresh air for the operator, when using the machine
in enclosed areas (tunnels etc.).
5. When grinding creates dust, connect machine to adequate dust collector.
6. When finish working, switch off the motor and move the machine the secure place and insure
against unauthorized use.
1.1.5.
Checkups, maintenance, service and repair.
•
regularly check the technical state of the machine.
•
if fault or damage is discovered ensure expert repair.
•
repair or service may bee carried out only by qualified personnel from a manufacturer’s service
organisation.
•
it is prohibited to carry repairs or service at places where the safety of work is not ensured and can
be affected by outside impingement, such as falling objects, collision with other machinery etc.
•
changes and alteration to the machine can be carried out only with the explicit agreement of the
manufacturer!
1.2.
Transporting the machine
1. Transporting or lifting the machine must be carried out only
by equipment of appropriate bearing or lifting capacity.
2. When transporting secure the machine against
overturning, moving or falling off.
3. It is advantageous to fold the handlebars to Compact
transport mode whilst transporting see pic. 1.
Pic.1 Compact transport mode
Remark: Handlebars can be easy lowered after loosening of two
M10 screws place on the rest side of the frame.
1.3.
Prohibited activities
When using the machine it is forbidden:
1. Using the machine for work other then for which is designed.
2. Operating the machine in other manners then those described in this manual.
3. Using the machine under influence of alcohol, narcotics or drugs and medicaments.
