LCS Pro units
— User Manual
Version 1.14
Page 7 of 43
1.9
Monitor interference
When an LCS Pro unit is used for EM security the magnetic fields induced by the EM
(De)Activator may result in monitor interference when placed in close vicinity (<<1.5 meter) of
an obsolete CRT monitor (CRT, Cathode Ray Tube) or TV. During EM activation (check-in) or
EM deactivation (check-out) the screen may be distorted temporarily. This is not a
malfunctioning of the unit or the monitor/TV. However the strength of the effect will vary
between different types of monitors/tv’s. To avoid this, increase the distance between this device
and the monitor/TV.
An LCD monitor (TFT) will not be interfered by the LCS Pro unit.
1.10 Optical book sensor
LCS Pro units contain an optical sensor to detect whether or not a book is present in the book
area. Over time, this sensor might get filled with dust and other small particles. Clean the sensor
once a month with a dry cloth to make sure the unit still detects books properly.
The optical book sensor
1.11 Installation
Protecting yourself from injury and harm is absolutely imperative. We strongly suggest that
before you begin to maintain, install or service any of your appliances that you strictly adhere to
each of the following:
Always wear gloves. A sharp edge on an appliance can hurt and/or cut your hands.
Be sure to wear safety boots. You can cause serious injury to unprotected feet by dropping
any heavy appliances or tools.
Remember to remove any jewelry when servicing an appliance.
Make sure you use the correct tools and that they are clean and in good condition.
Abstain from putting your hands into any section of the appliance that you have not visually
inspected for jagged edges or sharp screws.
Inspect your work area to make sure it is clean and free of water or oil spills.
Ask for help if you need to move a heavy object.
