ENGLISH
Dialogic Diva Client Quickstart Guide
page 15
Install Your Diva Client for Windows Software
To be able to use all features of Diva Client for Windows, you must install the
Diva Client for Windows software on your computer. The software installation
procedure is the same for all Diva Client adapters.
Note:
You must be logged on with administrator rights.
Install the Microsoft Windows 2000/XP/Server 2003/Vista
ISDN drivers
After you have installed your Diva Client adapter and connected your ISDN
line, turn on your computer. Windows detects the new hardware.
The procedure depends on the dialog box that appears on your screen, either
case 1 or case 2.
Note:
The screens for Windows XP, Windows Server 2003 and Windows Vista
may differ slightly from the ones shown below.
Case 1
1.
If Windows 2000/XP/Server 2003/Vista cannot install its own drivers for
your adapter, the ‘Found New Hardware Wizard’ appears. Click ‘Next’.
2.
In the ‘Install Hardware Device Drivers’ box, click ‘Search for a suitable
driver for my device (recommended)’ and click ‘Next’.
Summary of Contents for Diva ISDN USB
Page 62: ...Appendix www dialogic com...
Page 63: ...www dialogic com...
Page 64: ...Appendix www dialogic com...