Dialogic® Vision™ CX Video Gateway Administration ManualFine tuning the CX Video Gateway configuration
#-------------------------------------------------------------------------------
# oamsys.cfg - VX 5000
#-------------------------------------------------------------------------------
[board-0]
Product = CG
_
6565
_
4
Number = 0
Bus = 2
Slot = 3
IPC.AddRoute[0].DestinationAddress = <IP
_
CG
_
0>
IPC.AddRoute[0].Mask = <SUBNET
_
MASK>
IPC.AddRoute[0].Interface = 1
IPC.AddRoute[1].DestinationAddress = 0.0.0.0
IPC.AddRoute[1].Mask = 0.0.0.0
IPC.AddRoute[1].GatewayAddress = <GATEWAY
_
IP>
Clocking.HBus.ClockMode = STANDALONE
File = /opt/nms/vx/callserver/conf/cg/board-0.cfg
[board-1]
Product = CG
_
6565
_
4
Number = 1
Bus = 2
Slot = 2
IPC.AddRoute[0].DestinationAddress = <IP
_
CG
_
1>
IPC.AddRoute[0].Mask = <SUBNET
_
MASK>
IPC.AddRoute[0].Interface = 1
IPC.AddRoute[1].DestinationAddress = 0.0.0.0
IPC.AddRoute[1].Mask = 0.0.0.0
IPC.AddRoute[1].GatewayAddress = <GATEWAY
_
IP>
Clocking.HBus.ClockMode = STANDALONE
File = /opt/nms/vx/callserver/conf/cg/board-1.cfg
Media board configuration files
The media board configuration files (
board-
n
.cfg
) that ship with the CX Video
Gateway differ, depending on the gateway model, type of trunks (T1 or E1), and
whether the board is an octal board.
To identify which board configuration file to edit, check the value of the File keyword
in the
oamsys.cfg
file.
Note:
The CX Video Gateway can have up to three media boards. If it has multiple
boards, you need to edit each media board configuration file. For example, if you
have a two-board system, you must edit
board-0.cfg
and
board-1.cfg.
Dialogic
113
