background image

FUNCTIONS AND NOTES

FUNCTION

DP-SCRUB20 is suitable for ceramic tile flooring, marble flooring, epoxy flooring, PVC flooring, diamond flooring, terrazzo 

flooring, concrete flooring and hard floor cleaning. It has an 18-inch brush or pad driver to clean the floor, and the dirty 

water will be sucked into a recovery tank by the squeegee. Cleaning is finished after passing over the floor one time. The 

best feature of this machine quick dirt removal from the floor and it only requires one person.

ATTENTION

1. 

This machine is a high-efficiency, hard floor scrubber with clean and suction function, but no sweep function. In order 

to avoid any tangling and blockage, sweep the floor before operation.

2. 

This machine is suitable for smooth, hard floor cleaning. If you attempt to clean tile floor with gaps or a rough marble 

floor, although this scrubber can remove dirt, it can not absorb the dirty water completely as it would on a smooth 

floor.

3. 

This machine is designed for smooth, hard floors. In order to avoid any potential risk, do not walk and operate on an 

inclined plane.

4. 

Store and park the machine on the horizontal surface. Inexperienced people are forbidden to operate the machine.

5. 

Do not start or store the machine in an area with flammables, explosives, and chemical medicine.

6.  Operator is forbidden to wear slippers or be barefoot.

7.  Do not put hands or feet under the moving brush pad.

8.  Keep the electrical control parts away from water and any other liquid, it is useful to wipe the machine with a wet 

cleaning cloth.

9.  Maintenance and amendment should be done by professional personnel.

FUNCTIONS AND NOTES

Battery-powered and equipped with an automatic walking device, The DP-SCRUB20 is a professional floor-cleaning 

machine with following characteristics:

1.  Simple operation 

All actions including accelerating, stopping or retreating can be conducted by operating on the same handlebar. When 

this machine retreats to its limiting position, its emergency stop switch will drive the machine in the opposite direction 

after being pressed by the operator, so as to prevent the operator from being injured. 

2.  Power indication

 

Power can be indicated by different colored LCD, so that the operator is informed of the work load.

3.  Convenient maintenance

The recovery tank is detachable, you can take it off from the machine, which is convenient for cleaning. You can rinse 

the filter by screwing the floating frame. Or you can drain out the water in the solution tank separately, which is conve

-

nient for machine maintenance. 

4.  The dirty water tank cover is transparent, for easily checking tank levels. The transparent water level pipe clearly 

shows the water level. The suction motor is fixed under the dirty water tank for silent cleaning.

5. 

Pressurized function makes cleaning much easier, even for a floor with heavy dirt.

6.  Convenient for maintenance 

Squeegee replacement is quick and convenient.

Loosen the two fixed squeegee knobs in the suction squeegee, pull off the suction hose connection, then take off the 

suction part. Replace the back squeegee by loosening the fastener. Reverse the upper and lower to reuse the squee-

Summary of Contents for DP-SCRUB20














Reviews: