Diamatic 3140 DBP, Instruction Manual

www.diamaticusa.com

info@diamaticusa.com

The choice of professionals

5/12

US

Setting to work - connection to the 

power supply

WARNING!

■

Make sure there is no evident sign of damage 

to the vacuum cleaner before starting work.

■

Before plugging the vacuum cleaner into the 

electrical mains, make sure the voltage rating 

indicated on the data plate corresponds to that 

of the electrical mains.

■

Plug the vacuum cleaner into a socket with a 

correctly installed ground contact/connection. 

Make sure that the vacuum cleaner is turned 

off.

■

The plugs and connectors of the connection 

cables must be protected against splashes of 

water.

■

Check that for proper connection to the 

electrical mains.

■

Use the vacuum cleaners only when the cables 

that connect to the electrical mains are in 

perfect condition (damaged cables could lead 

to electric shocks!).

■

Regularly check there are no signs of damage, 

excessive wear, cracks or ageing on the electric 

cable.

WARNING!

When the vacuum cleaner is operating, do not:

■

Crush, pull, damage or tread on the cable that 

connects to the electrical mains.

■

Only disconnect the cable from the electrical 

mains by removing the plug (do not pull the 

cable).

■

Only replace the electric power cable with 

one of the same type as the original: SOOW 

(230V/60Hz - 440V/60Hz), the same rule 

applies if an extension is used.

■

The cable must be replaced by the 

manufacturer’s Service Centre staff or by 

equivalent qualified personnel.

Extensions

If an extension cable is used, make sure it is suitable for the 

power input and protection degree of the vacuum cleaner.

Minimum section of extension cables:

Maximum length = 20 m

Cable =   SOOW (230V/60Hz-440V/60Hz)

Max power (kW)

7

Minimum section (AWG)

8

WARNING!

Sockets, plugs, connectors and installation of the 

extension cable must maintain the IP protection 

degree of the vacuum cleaner, as indicated on the 

data plate.

WARNING!

The vacuum cleaner’s power socket must be 

protected by a differential circuit-breaker with 

surge current limitation, that shuts off the power 

supply when the current discharged to the 

ground exceeds 30 mA for 30 ms or an equivalent 

protection circuit.

WARNING!

Never spray water on the vacuum cleaner: this 

could be dangerous for persons exposed and could 

short circuit the power supply.

Dry applications

[ NOTE ]

The supplied filters and the bag (if applicable) must be 

installed correctly.

WARNING!

Comply with the safety regulations governing the 

materials for which the vacuum cleaner is used.

Maintenance and repairs

WARNING!

Disconnect the vacuum cleaner from its power 

source before cleaning, servicing or replacing parts; 

the plug must be removed from the socket.

■

Carry out only the maintenance operations 

described in this manual.

■

Use only original spare parts.

■

Do not modify the vacuum cleaner in any way.

Failure to comply with these instructions could 

jeopardize your safety.