background image

 

 

The parts must be received within sixty (60) days following the RMA origination date or the warranty 
claim will be denied. Once the parts are received they will be evaluated for warranty.   

 

If 

the 

customer 

cannot 

wait 

for 

the 

evaluation/replacement 

of 

the 

parts 

during  

this  process,  the  customer  must  issue  a  new  purchase  order  to  Diamatic  for  the  replacement  parts 
before they can be shipped.  Once the evaluation process is complete and parts are deemed a valid 
warranty claim, a credit will be issued against this invoice. 

 

 

4.  

The buyer may not return Diamatic products without Diamatic’s written authorization to do 
so.

 

 

5.  

Diamatic  reserves  the  right  to  inspect  and  determine  the  scope  of  its  warranty 
responsibilities for any returned Diamatic products.

 

 

6.  

Diamatic makes no warranty with respect to accessories it does not manufacture, including 
but  not  limited  to,  engines,  motors,  batteries,  tires  and  all  other  parts.    See  component 
manufacture warranty.

 

 

7.  

Diamatic reserves the right to make product changes or improvements without prior notice 
and without undertaking any obligation such changes or improvements on previously sold 
products.

 

 

8.  

The  above  warranty  conditions  can  only  be  altered  by  Diamatic.    Diamatic  must  confirm 
alterations in writing for each specific transaction.

 

 

9.  

Diamatic  reserves  the  right  to  modify  this  warranty  for  used  or  demo  products  on  an 
individual transaction basis.  Diamatic will include warranty modifications on its invoices for 
used or demo products

 

 

10. 

DIAMATIC  DOES  NOT  AUTHORIZE  ANY  PERSON,  REPRESENTATIVE  OR  SERVICE  OR 

SALES OUTLET TO MAKE ANY WARRANTY DIFFERENT FROM THIS PRODUCT WARRANTY

.

 

 

11. 

EXCEPT FOR ITS PRODUCT REPAIR OR REPLACEMENT OBLGATIONS DESCRIBED IN THIS 

PRODUCT WARRANTY, UNDER NO CIRCUMSTANCES SHALL DIAMATIC BE LIABLE TO THE 
BUYER  OR  ANY  OTHER  PERSON  FOR  ANY  DIRECT,  INCIDENTAL,  OR  CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF THE DIAMATIC PRODUCT OR FOR ANY SPECIAL 
OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER, INCLUDING WITHOUT LIMITATIONS, 
DAMAGES  FOR  ANY  LOSS  OF  GOODWILL,  WORK  STOPPAGE,  OR  ANY  AND  ALL  OTHER 
COMMERCIAL DAMAGES OR LOSSES

.

 

 

12. 

DIAMATIC MAKES NO OTHER PRODUCT WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, 

BUT  NOT  LIMITED  TO,  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS 
FOR A PARTICULAR PURPOSE

.

 

 

 

Summary of Contents for BGS-250














Reviews: