background image

 

 

 

Diamatic

® 

Warranty Registration Card

 

NOTICE!

 

TO THE DELIVERING DISTRIBUTOR OR END USER

 

To ensure the proper warranty coverage is extended to the owner of this machine, 

fill out the attached card 

COMPLETELY 

and 

ACCURATELY 

and return to Diamatic.

 

The warranty period will start on the delivery date entered below.

 

The distributor or the end user must prepare the machine warranty information card 
when the machine is delivered. Return of the warranty card will extend the warranty 
period to 

2 years 

from the date entered below. 

Failure to comply will make any and 

all warranties on the equipment void after 6 months.

 

 

USER’S REFERENCE INFORMATION

 

 

Delivery Date   

 

Delivering  Distributor’s  Name  and

 Address

 

Machine Model No.  

 

Machine Serial No.   

 

Modifications  

 

 

 

 

 

 
 

Signature of Delivering Distributor’s Representative

 

 

Blastrac is a registered trademark of Blastrac,NA

 

Fold and Detach Here

 

 

Warranty Registration Card

 

IMPORTANT! 

To ensure that your Diamatic

® 

machine is covered under warranty, please fill 

in the following information completely and mail or fax it to:

 

Diamatic, 5220 Gaines Street, San Diego, CA 92110

 

Fax 619-295-0754 

(Please print legibly)

 

Company 

 

 

Address 

 

 

City, State,  & Zip   

 

 

Telephone No. 

Contact Person   

 

Date of Purchase 

Date Received   

 

Machine Model No. 

Serial No.   

 

Distributor Name   

 

End  User  Name    

 

End  User E-mail    

 

Summary of Contents for BGS-250














Reviews: