Diamatic BGS-250 Operating Instructions Manual Download

Page: 3 / 13

The Choice of Professionals

̶̶̶̶

̶̶̶̶

www.diamatic.usa

P a g e

| 3 info@diamatic.usa

Table of Contents

EC DECLARATION OF CONFORMITY ------------------------------------------------------------------------------------------ 2

Introduction -------------------------------------------------------------------------------------------------- 4

Machine Description--------------------------------------------------------------------------------------- 4

2.1 Application ------------------------------------------------------------------------------------ 4

2.2 Accessory’s

------------------------------------------------------------------------------------- 4

Safety 5

3.1 Safety precautions -------------------------------------------------------------------------- 5

3.2 Safety regulations --------------------------------------------------------------------------- 5

3.3 Safety instructions ------------------------------------------------------------------------- 6

Initial Operation -------------------------------------------------------------------------------------------- 7

4.1 Checkpoints of Electrical Safety --------------------------------------------------------- 7

4.2 Checkpoints of Machine Safety --------------------------------------------------------- 7

4.3 Removing the diamond disc -------------------------------------------------------------- 7

4.4 Mounting the diamond disc -------------------------------------------------------------- 7

Operating -------------------------------------------------------------------------------------------------------- 8

5.1 Switch on the Machine --------------------------------------------------------------------- 8

5.2 Switch off the Machine -------------------------------------------------------------------- 8

5.3 Operating During Grinding -------------------------------------------------------------- 8

Maintenance ---------------------------------------------------------------------------------------------------- 9

Technical Data ------------------------------------------------------------------------------------------------ 10

Warranty------------------------------------------------------------------------------------------------------------11

Summary of Contents for BGS-250














Search results

Summary of Contents for BGS-250

Reviews:

Related manuals for BGS-250

Brands by name

Popular brands

Diamatic BGS-250, Operating Instructions Manual

Search results

Summary of Contents for BGS-250

Reviews:

Related manuals for BGS-250

Brands by name

Popular brands