MAINTENANCE
Replace the Fuel Filter
1. Lower the saw completely.
2. Close the fuel shutoff valve.
3. Place a drain pan under the hoses and in-
line filter.
4. Remove the hose clamp from both sides of
the filter.
Fuel Filter
5. Remove the filter from the hoses. Drain any
escaping fuel and dispose of the used fuel
and filter according to city, state, and
federal regulations.
6. Place the fuel hose coming from the fuel
tank onto the end of the filter (the arrow on
the filter should not point toward this hose).
Push the hose tightly up against the edge
of the filter and secure with the hose clamp.
7. Place the fuel hose coming from the engine
onto the other end of the filter (the arrow on
the filter should point toward this hose).
Push the hose tightly up against the edge
of the filter and secure with the hose clamp.
8. Open the fuel shutoff valve.
300 Hour Service
Replace the Air Cleaner Filter Elements
WARNING
DO NOT operate the saw without the air
filter installed.
1. Unhook the retaining clips and remove the
end caps.
Air Filter Assembly
2. Check and clean the inlet screen.
Air Filter Inlet Screen
3. Pull the outer filter element and inner filter
element out of the cleaner.
Outer and Inner Filter Elements
4. Inspect the inside of the cleaner housing
and end caps for debris, and wipe clean
using a damp lint free cloth as necessary.
DO NOT use compressed air to blow out
the inside of the air cleaner housing. DO
NOT allow dust to enter the air intake tube
when cleaning or replacing parts.
5. Place the inner filter element back into the
housing and gently push the element into
the unit until it feels secure.
6. Place the outer filter element back into the
housing (over the inner filter element) and
gently push the element into the unit until it
feels secure.
7. Reinstall the end caps and secure the clips.
35
Summary of Contents for CC3538JK Series
