CC7574DKV OPERATOR’S MANUAL
Prevent Regen
Parked Regen
Operation
Blade Size Selection
When the ignition switch is turned to ON, the display will begin to boot up. The first screen to appear
will be the “Blade Size Selection” screen. It is extremely important to have the correct blade size
selected for the installed blade on the machine. Not having the proper blade size selected for the
installed blade will result in reduced cutting efficiency and/or serious bodily injury! Refer to the RPM
and Blade Size Conversion Charts located in Appendix B at the end of this manual.
To select the proper blade size:
1. Scroll through the available blade sizes using the function keys associated with the right and
left arrow soft key commands located on the lower right side of the display panel.
2. When the proper size appears on the screen, press the select function key (middle key) to
accept the blade size and this will bring up the “Home” screen.
The blade size can also be selected from the “Home” screen by pressing the left function key
associated with the “Blade Size” soft key command. When the key is pressed the “Blade Size
Selection” screen will appear.
28
Summary of Contents for CC7574DKV
