![background image](http://html1.mh-extra.com/html/diamond-systems/alt1300-1g-xt/alt1300-1g-xt_user-manual_2494399024.webp)
Altair User Manual Rev A.02
www.diamondsystems.com
Page
24
4.11 LCD Panel (LVDS Interface) (J15)
This connector is mounted on the top side of Altair. It provides connection to an LVDS LCD display. The LCD
panel power is jumper selectable for 3.3V (default) or 5V.
1
Ground / D3+, depending on video chip
2
Ground / D3-, depending on video chip
3
Scan Direction (High = Reverse Scan, Low/open = Normal Scan)
4
LVDS Mapping (High = Map-B, Low = Map-A)
5
Signal Ground
6
Pixel Clock +
7
Pixel Clock -
8
Signal Ground
9
D2+
10
D2-
11
Signal Ground
12
D1+
13
D1-
14
Signal Ground
15
D0+
16
D0-
17
Power Ground
18
Power Ground
19
Vcc 3.3V / 5V (jumper configured)
20
Vcc 3.3V / 5V (jumper configured)
Connector type:
JAE part no. FI-SE20P-HFE or equivalent
Cable-mount socket:
JAE part no. FI-SE20S-2-L or equivalent