background image

 

iv

 

Important Safety Instructions 

1.

 

The AC adaptor supplied with the DV150 monitor 
isolates it from the AC mains power supply. 

2.

 

Unplug the AC adaptor from the wall outlet before 
cleaning. Do not use liquid or aerosol cleaners.  Use 
a soft cloth to clean the monitor housing and a tape 
to stick dust and fingerprints on the screen panel. 

3.

 

Slots and openings on the back or top of the cabinet 
are provided for ventilation.  They must not be 
blocked or covered. This product should never be 
placed near or over a radiator or other heat source, 
or in a built-in installation unless proper 
ventilation is provided. 

4.

 

The DV150 monitor should only be operated with the AC 
adaptor model LE-9702B, manufactured by Lien 
Electronics. If you are not sure of the type of mains 
power available, consult your dealer or local Power 
Company. 

5.

 

Never push objects of any kind, or spill liquid of 
any kind into this product. 

6.

 

Do not attempt to service this product yourself as 
opening or removing covers may expose you to 
dangerous voltages or other risks.  

7.

 

If any abnormal operation or accident (such as 
dropping the unit) occurs, disconnect the monitor 
from the wall power outlet and contact qualified 
service personnel. 

 

Summary of Contents for DV150




























Reviews: