10
5.2 - Operation
WARNING!
The device is specially designed for working on a programmed basis, thus for activating
after it has been programmed and activated. The device, therefore, does not require the
direct intervention of an operator to physically start, but activates automatically on the basis
of the set programme.
The programming and subsequent activation of the device are thus very important phases
and must be carried out by qualified personnel possessing an in-depth knowledge of this
manual and also of ozone’s effects on people, animals and the environment.
The chosen person must have a hierarchical role within the organisation and must have the
power to organise, arrange and check to ensure that:
-
no people or animals are present while the appliance is running and in the hours
immediately afterwards;
-
the appliance cannot be tampered with or re-programmed by people not directly
instructed by him/her;
-
internal protocols are drawn up and adequate information is provided (for example,
warning and hazard signs, etc.).
Ozone has a high oxidising power, which makes it effective in destroying germs, bacteria
and mould and in passivating viral loads on surfaces, objects and in the air.
To sanitise the environments correctly, programme the device on the basis of the
respective programming table shown on page 11.
The actual O
3
production capacity of the device is shown in the technical data table (see
page 6) and the production is expressed in g/h (grams per hour).
All the devices we manufacture are suitable for use in medium-sized open-space
environments. The layout of the environments and the equipment present in them may
prevent or limit the correct and uniform diffusion of O
3
throughout the room.
Due to its intrinsic properties, ozone will tend to dissipate naturally once the device stops
working. We nonetheless recommend not returning to the treated rooms unless at least 6
hours have elapsed from the end of the cycle, after ventilating them thoroughly and leaving
the area for at least a further 15 minutes to allow a total change of air, before the area is
used again permanently.
Remove the plug from the power outlet and store the device in a place accessible only to
the person responsible for its use.
WARNING!
Ozone has a strong oxidising effect that is hazardous to health.
Prolonged exposure to ozone causes oxidation and therefore ageing of surfaces and
materials (in particular plastic or rubber materials, non-treated steels, etc.) or electrical or
electronic equipment.
Summary of Contents for 61051122
